Tecumseh OH195SA-72554 5.5 HP SNOW BLOWER THROWER ENGINE Step shaft NEW

TECUMSEH SNOW KING OH195SA 5.5 HP HORIZONTAL MTD CRANKSHAFT (see picture and measurement). Not REBUILT, not REFURBISHED… Your old engine must have the same crankshaft size as the new replacement engine. You can always measure the crankshaft size. OH195SA Snow king series (old name OHSK55). OVERHEAD VALVE DESIGN O. Crankshaft Keyway: 3/16 Width VERY IMPORTANT (PLEASE READ BEFORE PURCHASING). This is a great replacement engine for many SNOW TECUMSEH engines that have SAME HORIZONTAL CRANKSHAFT SIZE. If your engine looks similar to this, has same MTD Style step Tecumseh crankshaft 37681 and you don’t care about the HP or Gross Torque difference, you can use this engine. Please make sure your engine has the same crankshaft size. Otherwise, it will not work. This horizontal crankshaft engine WILL NOT replace a vertical crankshaft engine. This will replace most (not all) MTD, Yard Man and other snow blower which has 5 or 5.5 HP Tecumseh engine with same crankshaft size and other specifications. Make sure you measure the crankshaft diameter and length and compare with our pictures before purchasing. We are not responsible for the fitness. If you have any questions, please ask. Don’t assume that this will work for you just because you have a MTD snow blower or your engine looks similar to this. Compare and confirm the crankshaft measurement and all other things before purchasing. You have to take the engine off from your snow blower to compare with our. You are welcome to send us the pictures of your engine. These numbers can be found on a plate of your engine. We have a lot of engines available. Have not heard from us. If the 24 hour period has passed and you have not heard anything from us, PLEASE try one more time. There might be some problems preventing your message from getting to us. Please leave us a message if the line is busy or nobody answers. It is also easier for us to contact you if there is any problem, providing we have all the correct information. VERY IMPORTANT: Engine(s) may or may not be filled with oil. PLEASE check your engine oil level and add oil as needed before using. We will not do it. : Other Engines We are Carrying. We are carrying ALMOST full lines of all brand name engine for Lawn Mowers, Snow Throwers, Sport Fun Cart/Kart, and Trimmers etc… Please look at the return condition we set on the top of this page. Please remember, if you send a request to look for an engine, it is our courtesy and pleasure to research on your engine’s fitness and specification for you. We use our best knowledge and experiences to answer all your questions. However, we are not responsible for your engine’s fitness, functionality or merchantability. It is customer’s job to assure that the engine ordered will work and fit for their specific application. WARNING: WORKING WITH ENGINES or POWER TOOLS SUCH AS SAWS, GRINDERS, DRILLS, CHAIN SAWS, AND THE LIKE, PRODUCE A POTENTIAL RISK TO THE USER. CARE AND CAUTION AT ALL TIMES SHOULD BE EXERCISED BY THE USER TO AVOID POSSIBLE LOSS OF PROPERTY OR PERSONAL INJURY OR DEATH. What is a VERTICAL crankshaft engine? Vertical (up and down) crankshaft engine has its crankshaft on the bottom and when mounted on an application, the crankshaft must point down to the ground. Vertical crankshaft engines can’t replace horizontal crankshaft engines most of the time. A vertical crankshaft engine may look similar to a horizontal crankshaft engine (vice versa), but because the ways of the two engines’ set up, one can’t replace another. What is a HORIZONTAL crankshaft engine? A Horizontal (side) crankshaft engine has a crankshaft on its side and when mounted on an application, the crankshaft must point side way. A Horizontal crankshaft engine can’t replace a vertical crankshaft engine most of the time. A horizontal crankshaft engine may look similar to a vertical crankshaft engine (vice versa), but because the ways of the two engines’ set up, one can’t replace another. Measure the Diameter of a crankshaft. Diameter is the distance of the center of a circle (see picture). It is very important that your new engine crankshaft’s diameter must be the same as your old engine’s in order to reuse all the pulleys and electric clutches. In this case you have to use some 1″ Inside Diameter x 1-1/8″ Outside Diameter sleeves to convert the 1″ diameter to 1-1/8″ diameter. We have these sleeves available. Add a map to your own listings. The item “Tecumseh OH195SA-72554 5.5 HP SNOW BLOWER THROWER ENGINE Step shaft NEW” is in sale since Friday, October 30, 2009. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers\Lawn Mower Parts & Accessories”. The seller is “engine4less_com” and is located in Bellevue, Nebraska. This item can be shipped to United States.
  • Horsepower: 5.5 HP
  • Model: OH195SA-72554
  • Type: Engine
  • MPN: OH195SA72554
  • Brand: Tecumseh
This article was filed under tecumseh.

Comments are closed.

Notice!

Please enable widgets in bottombar!