6″ Tiller Snow Blower Thrower TIRE RIM WHEEL 3/4″ID shaft TWO 13×5.00-6 assembly. Your assembly will arrive aired up and ready to mount on your axle. This is a directional LEFT & RIGHT Assembly. BRAND: OTR SIZE: 13×5.00-6. DESCRIPTION: 4ply (load range “B”) Tube-Less Tiller / Snow Blower Tire NHS. Height: 13.0 inches Width: 4.7 inches. Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NHS This is a N on H ighway S ervice Tire. Dowel Pin Drive Axle Wheel. Commercial Grade Rim/Wheel for Tiller, Snow Blower, and other applications. Wheel Over All Shaft Length. (measured through center of shaft). NOTE: NHS This is a N on H ighway S ervice WHEEL. Original Equipment applications include: John Deere, Snapper, Arens, Murray, Skagg, Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. SEE PICTURES AND SPECS FOR DETAILS. YOU MOUNT IT YOU BOUGHT IT. This WHEEL is not intended for use in automotive Passenger Car or Light Truck applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.

This John Deere outdoor power equipment set includes a 33 tiller, 49 blower gearbox, and a short shaft M42511 Shaft that is compatible with models 316, 317, 140, and 318. The single-stage snow blower type and 49-inch clearing width ensure efficient snow removal. The unit requires assembly but comes with all items included, except for the battery. The 4-stroke engine type and 12V voltage provide powerful performance. The cable length is “Ma, ” and it weighs 4oz. The California Prop 65 warning does not apply.

CUB CADET RIGHT ANGLE GEARBOX QA36 QA42 SNOWBLOWER 1A 2A TILLER Mounts Pto. Comes with mounts and pto shaft. This one does not turn over by hand. Needs to be put in vice or taken apart.

CUB CADET RIGHT ANGLE GEARBOX QA36 QA42 SNOWBLOWER 1A 2A TILLER Mounts Pto. Comes with mounts and pto shaft. This one turned over fine.

REAL NICE GEAR BOX GOOD BEARINGS GOOD KEY WAYS READY TO INSTALL LOOK AT PICTURES. 7 LBS 8 OZ BOXED.

Not sure if these parts are compatible or not. Maybe can fabricate some additional parts to make this work.

TWO John Deere TIRE RIM WHEEL assemblies 13×5.00-6 for some Garden Tiller Snow Blower Thrower with 3/4 ID shaft. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. Does not fit all models! These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L and 86151-R. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: John Deere. Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.

13×5.00-6 13×500-6 13/5.00-6 TIRE RIM WHEELs Garden Tiller Snow Blower Thrower. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L ; 86151-R. This Kenda tire rim assembly is designed for medium to heavy-duty usage and fits some but not all models of various brands including McCullagh, Worx, DR Trimmer, Ditch Witch, Brunton, and more. The 13×5.00-6 size and 2-ply construction make it suitable for self-propelled tillers, trimmers, brush mowers, and even go karts, snow blowers, and throwers. Items included in this (2)first quality new tire & rim assemblies mounted with 1/4 inch dowel hole and 3/4 inch ID axle rims, aired up and ready to mount. The equipment types it can be used with include ground drive, mowers, edger’s, carts, wagons, pulling, traction, ground driven equipment, snow throwers, snow removal, snow plows, rear tine tillers, garden tillers, garden equipment, chippers, shredders, and more. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: Husqvarna, John Deere, Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.

Here is the answer! CARLISLE SNOW HOG solves the problem. Depending on the size you need these tires will fit all brands of Tillers, Snow Blowers, Go Karts, Fun Carts, Edger’s, Trimmers, Conventional Riding Mowers & Zero Turn mowers, pulling axles on all kinds of other equipment. This tire was originally designed for All Major brand tillers, snow blowers and DR Trimmers and mowers and has many custom applications. The X Tread holds firm for maximum Traction in Mud, Sand Gravel, Marsh’s, Swamps, Plowed fields, Dairy barns and Feed Lot applications. THE ROUNDED SHOULDER MAKES THIS A GREAT STEER TIRE FOR THE FRONT OF SAND RAILS, LAWN MOWERS AND GO KARTS! You can count on the quality of Carlisle. This CARLISLE Snow Hog tire is also perfect for a variety of outdoor power equipment, including power snow shovels, cultivators, snow blowers, and rear tine tillers. With a diameter of 17.2 inches, this tire is compatible with too many brands and models to list here, and can handle a capacity of 760 pounds per tire. Made of high-quality rubber material, this tire is durable and built to last. Whether you’re a homeowner or professional landscaper, this CARLISLE Snow Hog tire is an excellent choice for your outdoor power equipment needs. With its versatile compatibility and reliable performance, you can trust this tire to get the job done. CARLISLE 18×6.50-8 18×650-8 18/650 18/6.50-8 Snow Hog Thrower Blower Tiller TIRE. BRAND: CARLISLE SIZE: 18×6.50-8 TREAD: SNOW HOG. DESCRIPTION: 4ply (load range “B”) Tube-Less Traction LUG Tire NHS. Height: 17.3 inches Width: 6.6 inches Rim Diameter: 8 inch. Recommended Rim Widths: 5 to 6.35 inches wide. Maximum Weight Carrying Capacity: 770 lbs. NOTE: NHS This tire is a N on H ighway S ervice Tire. This tire is not intended for use in automotive Passenger Car or Light Truck applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.