This offer is for a complete used 24 width cast iron gear case assembly known as part # 610984, 61098400 and 51003200 which contains the gear set part # 510014 inside of it. This gear-case had a new helical ring gear and bushings installed a few years ago by us (the input shaft is original and was in perfect shape) – and then the motor on the unit gave up this winter. We decided to recycle the gear-case because this case is ready to use with little use received after the prior refresh – and it has good known parts in it. A new gear set by itself was last 262.00 and the last price for the original gear case was 699.00. There is a new version cast iron case that can replace this part- but it’s no where near as tough as the original was (is). This part is pre-built, and ready to install and use now. We are including a new bottle of Ariens L-3 full synthetic gear oil (worth 17.00) as well as new shear bolts for the auger tines, and new roll pins for the impeller – all you need to reassemble your unit is with the gear box. You will reuse your original aluminum/bronze support flanges for the rake shaft, and your original ball bearing for the rear impeller shaft. We’d suggest you check the impeller shaft support ball bearing while you are doing the job, because it’s 30+ years old too. Then this case assy will not work for you. We have carefully packed this part to make sure it arrives in good condition – we have placed poly tubes over the shaft ends to make sure they don’t poke out of the box and get messed up, and plenty of padding inside the box to minimize shifting. The new shear pins are under one of the box flaps, and the box is marked accordingly. The box is a work of art itself. Please feel free to send an inquiry about applications and/or fitment to your unit. Can’t find what your looking for? The free listing tool.

The product is an MTD snow blower yard machine with a pull and electric start feature. It is a single-stage snow blower powered by gasoline, with an engine size of 8 horsepower. The machine has a tank capacity of 1 gallon and operates on 120 volts. Made of aluminum and steel, this model from MTD is designed for reliable performance in clearing snow from driveways and sidewalks.

Genuine Ariens Snowblower Auger Gear set for Older models with cast iron gear cases. This set has the standard # 10183 Helicon Gear for 1 Diameter Shaft. The worm shaft is 12-5/8 long. We have a few Helicon Gears left the are of the 7/8 diameter shaft version. We have 4 different versions of Worm Shafts. Please check your old parts for proper application. Please specify which size gear and shaft you need. All of these gear sets are NOS UNUSED Ariens parts from an old inventory. There may be signs of oxidation from age. This will not affect the use. This list is for one (1) gear set. One Helicon Gear and One Worm Shaft.

This is a nice used auger gear case from a Toro Powershift 624, model # 38140. This is the original style. Any questions just ask.

Genuine Ariens Light Kit for Older Tecumseh Snow Engines # 724044 OEM NOS. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “patr-3440″ and is located in this country: US. This item can be shipped to United States.

• Power Source: Portable Generator
• Type: Light
• Brand: Ariens
• Voltage: 12 V

Up for offer is a used fully functional Ariens 24 wide cast iron auger gearbox assy part # 510032 that includes the following parts to make up the assembly: internal gear set # 510014 (the original gear set was known by old #’s 10183 & 10177), cast iron gear case # 10180, side cover 10181, cross shaft 10299. This gear case was also known by the prior part # 610984. This gear case fits older Ariens snow blowers and it has the following unique features to identify it : A the shear bolts are the larger 5/16 dia. Size (some early versions have 1/4 bolts) B the auger rake cross shaft has bolt holes tapped into the ends of the shaft for retaining hardware (some early versions have BIG nuts on the shaft ends) C and the cast iron drive jaw would have splines on the tail shaft for the clutch jaw to slide back and forth – so you can disengage the front end from the rest of the drive. This unit design will have 2 clutch levers next to each other on the front end (early models only have one main clutch lever and cannot use this gear case assy). This part is in good condition w/ normal discolorations on the metal surfaces, and is ready to be re-assembled and used. We will include a new quart of gear oil with the gearbox so that you can refill it after it is installed. The original donor unit was broken down for parts after the engine took a vacation and never came back. We will supply a pair of new roll pins for the impeller/ fan and 2 new shear bolts for the auger tines for convenience of re-assembly. This part was from a snowblower with the model # of 910995 although this same part number was used on many older 5hp, 6hp, 7hp single belt powered two stage propelled snow blowers that Ariens made from 1950 thru 1970′s that are orange and white colored. This part was used on many older snow blowers, such as model #’s 10M5, 10M6, 10M6D, 10M7D, 10ML60D, 10ML60, 910002, 910006, 910007, 910008, 910009, 910010, 910013, 910014, 910016, 910017, 910018, 910019, 910020, 910021, 910942, 910954, 910955, 910962, 910965, 910995, 10942, 10954, 10962, 10969, 10970. Oo new – IF you could find one. The gear set alone is worth 279.00, the empty gearcase is worth 149.60 and that doesn’tinclude the side cap, bearings, bushings etc. So needless to say it would cost at least 500 – 600.00 dollars to recreate this box in new separate replacement parts!! – so don’t miss your chance to get it here for much less! The photos shown are of the item you will receive. HARD TO FIND VINTAGE PART. Can’t find what your looking for? >> Check out our Store. The free listing tool. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “sherwoodispower” and is located in this country: US. This item can be shipped to United States.

• Model: many older models
• Country/Region of Manufacture: United States
• Battery Included: No
• Custom Bundle: No
• Engine Type: na
• Assembly Required: Yes
• Product Line: vintage deluxe models
• Material: Alloy Steel, Iron
• Tank Capacity: na
• Power Source: Tecumseh Snow King engine
• Type: Two Stage
• Features: na
• MPN: 510032 , 510014
• Battery Life: ummm- no
• Engine Size: 5 , 6 , 7 hp
• Power: Gas
• Brand: Ariens
• Country of Manufacture: United States
• Snow Blower Type: 2 stage self propelled
• Product Type: Snow Throwers & Blowers
• Part category: Original equipment housing
• Part condition: clean used
• Clearing Width: 24\
• Noise Level: none
• Voltage: na

Up for sale is a consignment, USED WORKING condition TORO 3521 snow blower. Starts and runs but since it is old it is not as powerful as it once was. Tires are good with chains. Not used for a couple of years. Looks complete(see all pictures). See all pictures and be the judge. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “joecommish” and is located in this country: US. This item can be shipped to United States.

• Model: 3521
• Country/Region of Manufacture: United States
• Power Source: Gas
• Type: snowblower
• Brand: Toro
• Clearing Width: 21\

Here is a vintage Ariens cast iron auger gearbox with impeller from and early 10M 7HP 24 blower. This has a 1″ diameter auger shaft, a 12″ impeller, and 3/4 impeller shaft that is splined to accept the jam clutch. Spins smoothly and is tight. The item “Ariens Auger Iron Gearbox with impeller from older 10M 724-NICE” is in sale since Monday, November 21, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Snow Blowers”. The seller is “wegs1500″ and is located in Buffalo, New York. This item can be shipped to United States.

• Type: Two Stage
• Brand: Ariens
• Power Source: Gas
• Clearing Width: 24″
• Model: 10M
• Country of Manufacture: United States