This is a set of good used cast iron auger gearbox castings from a Simplicity P1524E snowblower, model #1695665.

This offer is for a complete used 24 width cast iron gear case assembly known as part # 610984, 61098400 and 51003200 which contains the gear set part # 510014 inside of it. This gear-case had a new helical ring gear and bushings installed a few years ago by us (the input shaft is original and was in perfect shape) – and then the motor on the unit gave up this winter. We decided to recycle the gear-case because this case is ready to use with little use received after the prior refresh – and it has good known parts in it. A new gear set by itself was last 262.00 and the last price for the original gear case was 699.00. There is a new version cast iron case that can replace this part- but it’s no where near as tough as the original was (is). This part is pre-built, and ready to install and use now. We are including a new bottle of Ariens L-3 full synthetic gear oil (worth 17.00) as well as new shear bolts for the auger tines, and new roll pins for the impeller – all you need to reassemble your unit is with the gear box. You will reuse your original aluminum/bronze support flanges for the rake shaft, and your original ball bearing for the rear impeller shaft. We’d suggest you check the impeller shaft support ball bearing while you are doing the job, because it’s 30+ years old too. Then this case assy will not work for you. We have carefully packed this part to make sure it arrives in good condition – we have placed poly tubes over the shaft ends to make sure they don’t poke out of the box and get messed up, and plenty of padding inside the box to minimize shifting. The new shear pins are under one of the box flaps, and the box is marked accordingly. The box is a work of art itself. Please feel free to send an inquiry about applications and/or fitment to your unit. Can’t find what your looking for? The free listing tool.

This is a set of good used cast iron auger gearbox castings from a Simplicity P1524E snowblower, model #1695665.

This listing is for a vintage Tecumseh HM80 that I bought some years back as a backup engine for a minibike of mine-but it’s just been taking up shelf space and it needs to go to someone else who needs it. It needs the carb serviced at a minimum from sitting as I’m sure the rubber seals are dried up-and there’s obviously not a fuel tank. Someone before me butchered the shroud-but those are easily sourced or someone could repair this unit if they wanted. It fires easily on starting fluid and will be a serious runner as all these old HM80′s are known for. I do NOT know what this engine was originally on as it’s a strange color green. Photos show condition of this motor-nothing hidden or covered up. This will be a great engine for whatever you could use it for.

This is a hard to find spindle and friction/drive disk assembly from a Bolens 726 snowblower. It’s in nice used condition, ready to work. Please ask if you have any questions. I have many more parts for these machines, let me know what you need!

This 32 Cross Shaft pertains to an older model Ariens snow blower, such as Ariens # 910995. This part is NEW, but it is not in its’ original packaging. The Cross Shaft is listed as 32″ in length, but the actual length (as measured) is 31 -7/8″. The part contains 5 holes for pin placement as well as a single threaded hole on either end (for a total of 7 holes in the shaft). This Ariens Cross Shafts’ appearance condition (as viewed in listing photos) is 95%, but the actual material condition is 100%. Feel free to send us your model and serial #’s from your unit for confirmation of this part fitting your snow blower. This is a vintage part removed from our brick and mortal store inventory due to it’s obsolete status. Can’t find what your looking for?

Genuine Ariens Snowblower Auger Gear set for Older models with cast iron gear cases. This set has the standard # 10183 Helicon Gear for 1 Diameter Shaft. The worm shaft is 12-5/8 long. We have a few Helicon Gears left the are of the 7/8 diameter shaft version. We have 4 different versions of Worm Shafts. Please check your old parts for proper application. Please specify which size gear and shaft you need. All of these gear sets are NOS UNUSED Ariens parts from an old inventory. There may be signs of oxidation from age. This will not affect the use. This list is for one (1) gear set. One Helicon Gear and One Worm Shaft.

Ariens 52104100 – Replacement MPN: 52104100 GEAR CASE ASSY – DLX IRON Genuine Ariens Part # 52104100. Ariens 52104100 Gravely Gear Case Assembly Dlx Iron. Ariens Part Number: 52104100 Compatible with the following Models: Ariens Platinum SHO 30 Ariens Platinum SHO 28 Track Ariens Platinum SHO 24 Ariens Deluxe SHO 28 Ariens Deluxe Platinum 30 Ariens Deluxe Platinum 24 Ariens Deluxe 30 Ariens Deluxe 28 Track Ariens Deluxe 28 Ariens Deluxe 24 Track Ariens Deluxe 24. We are proud to be a factory authorized retailer. We use several different carriers and choose the most economical for the item and destination based on the estimated transit time displayed. FixMyToys – A Division of Ball Equipment.

This is a set of good used cast iron auger gearbox castings from a Simplicity P1524E snowblower, model #1695665.

Hard to find Pulley hub for John Deere 828D and 824E may fit other models.