6″ Tiller Snow Blower Thrower TIRE RIM WHEEL 3/4″ID shaft TWO 13×5.00-6 assembly. Your assembly will arrive aired up and ready to mount on your axle. This is a directional LEFT & RIGHT Assembly. BRAND: OTR SIZE: 13×5.00-6. DESCRIPTION: 4ply (load range “B”) Tube-Less Tiller / Snow Blower Tire NHS. Height: 13.0 inches Width: 4.7 inches. Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NHS This is a N on H ighway S ervice Tire. Dowel Pin Drive Axle Wheel. Commercial Grade Rim/Wheel for Tiller, Snow Blower, and other applications. Wheel Over All Shaft Length. (measured through center of shaft). NOTE: NHS This is a N on H ighway S ervice WHEEL. Original Equipment applications include: John Deere, Snapper, Arens, Murray, Skagg, Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. SEE PICTURES AND SPECS FOR DETAILS. YOU MOUNT IT YOU BOUGHT IT. This WHEEL is not intended for use in automotive Passenger Car or Light Truck applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.

TWO John Deere TIRE RIM WHEEL assemblies 13×5.00-6 for some Garden Tiller Snow Blower Thrower with 3/4 ID shaft. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. Does not fit all models! These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L and 86151-R. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: John Deere. Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.

13×5.00-6 13×500-6 13/5.00-6 TIRE RIM WHEELs Garden Tiller Snow Blower Thrower. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L ; 86151-R. This Kenda tire rim assembly is designed for medium to heavy-duty usage and fits some but not all models of various brands including McCullagh, Worx, DR Trimmer, Ditch Witch, Brunton, and more. The 13×5.00-6 size and 2-ply construction make it suitable for self-propelled tillers, trimmers, brush mowers, and even go karts, snow blowers, and throwers. Items included in this (2)first quality new tire & rim assemblies mounted with 1/4 inch dowel hole and 3/4 inch ID axle rims, aired up and ready to mount. The equipment types it can be used with include ground drive, mowers, edger’s, carts, wagons, pulling, traction, ground driven equipment, snow throwers, snow removal, snow plows, rear tine tillers, garden tillers, garden equipment, chippers, shredders, and more. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: Husqvarna, John Deere, Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.

6 Snow Blower Thrower RIM WHEEL 6×3.25 fits 4.10-6 13×5.00-6 15×5.00-6 Tires. If you mount it you bought it! RIM DIAMETER: 6 inches SIZE: 6 x 3.25 (3.25 INCHES WIDE). BOLT PATTERN: CENTER SHAFT ; DOWEL BOLT TYPE (see hole in rim shaft ; valve stem side). CENTER HOLE OPENING: 0.75 inch (uses 3/4 inch shaft or axle). SHAFT LENGTH: 3.25 inches (this is over all SHAFT length and is measured through the center of the rim’s shaft) end to end. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of rim, valve stem side – 1.25 inch. Inside of rim, towards the frame of mower – 1.50 inche. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. WORKS WITH THE FOLLOWING TIRE SIZES: 3.50-6 ; 4.00-6 ; 4.10-6 ; 4.10/3.50-6; 13×5.00-6 ; 13×6.50-6; 15×5.00-6 ; 15×6.00-6 ; 8.00-6 AND OTHERS. This item is not intended for use in High Speed, Trailer, Passenger Car or Light Truck applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME. Possible Original Equipment applications include: John Deere, Snapper, Arens, Murray, Skagg, Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snowblowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. The item “6 Snow Blower Thrower RIM WHEEL 6×3.25 fits 4.10-6 13×5.00-6 15×5.00-6 Tires” is in sale since Tuesday, September 12, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers\Lawn Mower Parts & Accessories”. The seller is “atvmaster” and is located in Oldfort, Tennessee. This item can be shipped to United States.

• Brand: Unbranded
• Type: Wheel
• Model: Drive axle wheel
• MPN: 6676-47