John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

John Deere TIRE RIM WHEEL 13x5.00-6 for Garden Tiller Snow Blower Thrower 3/4 ID

TWO John Deere TIRE RIM WHEEL assemblies 13×5.00-6 for some Garden Tiller Snow Blower Thrower with 3/4 ID shaft. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. Does not fit all models! These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L and 86151-R. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: John Deere. Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.
This article was filed under john.

Comments are closed.

Notice!

Please enable widgets in bottombar!